Case Study: Coal Mill Rejects Handling System for PF Boilers
Denseveyor dense phase system conveying rejects from 14 coal mills to bunkers, built for BHEL at NTPC SAIL Power Company Stage II (2 x 250 MW).

Project Synopsis
| Name of the Client / Purchaser | BHARAT HEAVY ELECTRICALS LTD. NEW DELHI |
| Location of the Plant / project | STAGE – II (2 X 250 MW) NTPC SAIL Power Company Ltd |
| Brief Scope of Work | Design, Engg., Manufacturing, Supply, Erection, Testing & Commissioning of complete Mill Rejects Handling System |
| Installed System | Collection of the rejects from 07 mills (working 06 Nos.) and pneumatically conveying to a storage bunker for each boiler unit. |
Coal Mill Rejects Handling System:
Coal Mill Rejexts System:
Macawber Beekay have pioneered in employing Denseveyor system for handling ‘difficult’ rejects from pulverizing mills to bunkers in power plants. Conventional conveying systems suffer from many inherent disadvantages leading to frequent breakdowns, burning of belts, spillage of rejects, heavy structural works posing movement restrictions, choking of screws etc. These effect continuous operation of system resulting in production losses and heavy maintenance and replacement costs.
Macawber Beekay’s Denseveyor system with distinct merits such as negligible maintenance and recurring costs, requirement of very less space for installation (conveying pipes travel overhead) thus leaving the plant movement unrestricted. Totally enclosed system ensures no spillage of mill rejects, no excavation works like trenches and civil foundations.There is an individual system for each mill.
Denseveyor system with proven track record for mill rejects handling in power plants is now the established technology and enjoys widespread acceptance of power plant engineers.
Principle Of Operation:
The pneumatic cylinder operated plate valve at mill outlet (Pyrite Hopper Inlet) is normally kept open. Mill Rejects from coal mill drop into the Pyrite Hopper through the grid. Oversized material is retained on the grid. Manual Operated Plate Valve on Over-size material discharge chute is operated on need basis. The bypass chute is fitted with a Manual operated plate valve and is opened in case of emergency only. Whenever the Manual operated oversize valve is to be opened, it shall be ensured that Pyrite Hopper inlet valve is closed. The Hand Wheel operated plate valve at Pyrite Hopper Outlet is normally kept in open position as it is a maintenance valve. Denseveyor is installed below the Pyrite Hopper for conveying coal mill rejects to Rejects Bunker through independent material conveying pipeline. On top of the Bunker, a bag filter is provided to vent out clean air. Bunker is also equipped with a manually operated sector gate for discharge of rejects into the trucks.
Mill Rejects Handling System:
The Configuration of the Coal Mills of boiler units is in two rows on either side of the boiler with one stream of three mills and another stream of four mills on the other side of boiler.There are seven mills in each unit i.e. total 14 mills in two units. Each mill is provided with collection and conveying equipment as defined above.
Conveying Air System
2×100% (1W+1Sb) reciprocating non-lubricated type air compressors with drive, housed in Compressor Room are provided to supply Compressed Air required for mill rejects conveying. The compressed air system has two air receivers, and necessary pipe work.
Instrument Air System
For equipment operation in the system, instrument air is provided at each stream through distribution pipe work from the specified tapping point to Pneumatic Cylinder Operated Plate Valves, Denseveyor Panel and Bag Filter.
Cooling & Spray Water System
Cooling water requirements of Water-Cooled Top Plate of Dome Valve in Denseveyor Assembly are met from the Service Water circuit. Necessary pipe work is provided in this system. Spray Water for mill rejects quenching is sourced from Service water connection provided at each stream and sprayed in Pyrite Hopper through a solenoid valve operated spray nozzle.
Questions this answers
How does the mill rejects system work at this plant?
Mill rejects drop through a grid into the pyrite hopper, where oversized material is retained. A Denseveyor below the hopper conveys the rejects through an independent pipeline to the rejects bunker, which has a bag filter venting clean air and a manual sector gate for discharge into trucks. Spray water quenches rejects in the pyrite hopper, and service water cools the Dome Valve's top plate.
Systems discussed
- Coal mill rejectsPneumatic coal mill rejects handling: dense phase conveying of pyrites and rejects up to 40 mm from pulveriser mills to bunkers, one enclosed system per mill.
- Dome ValveMacawber Beekay Dome Valve: full-bore flow, inflatable pressure-tight seal, 50-500 mm bore, -20 °C to +480 °C, up to 30 bar, for abrasive bulk materials.
- Coal handlingTurnkey coal and lime handling plants: wagon tipplers, track hoppers, feeders, crushers, screens, stacker-reclaimers, and civil, structural, electrical works.
More from our engineers
- Coal Handling System for Power Plants: Macawber Beekay's EPC ExpertiseHow a power plant coal handling system works, from wagon tippler or track hopper unloading through crushing, stacking and reclaiming to bunker feeding.
- Different Types of Bottom Ash Handling Systems ExplainedWet jet pumping, semi-dry submerged scraper chain conveyor (SSCC), dry mechanical and dense phase pneumatic bottom ash handling compared on water use and fit.
- Pneumatic Ash Handling System for CFBC Boilers: How It Handles Bed Ash and Fly AshWhy dense phase pneumatic conveying suits CFBC and AFBC bed ash and fly ash, the key design points, and the 2 x 300 TPH CFBC boiler project at HMEL Bhatinda.
Talk to our engineers.
Planning a new plant or upgrading one? Our engineering team in Noida is ready to help.