Articles from our engineers
How ash handling systems, pneumatic conveying, coal handling plants and green coal work, written by the people who design and build them.
Ash handling and pneumatic conveying
- Different Types of Bottom Ash Handling Systems ExplainedWet jet pumping, semi-dry submerged scraper chain conveyor (SSCC), dry mechanical and dense phase pneumatic bottom ash handling compared on water use and fit.
- Pneumatic Ash Handling System for CFBC Boilers: How It Handles Bed Ash and Fly AshWhy dense phase pneumatic conveying suits CFBC and AFBC bed ash and fly ash, the key design points, and the 2 x 300 TPH CFBC boiler project at HMEL Bhatinda.
- Vacuum Conveying vs Positive Pressure Conveying for Fly Ash Handling: Which Is Better?Vacuum conveying suits many ESP hoppers over short runs; positive pressure suits long transfers to the silo. Why large plants combine both in two stages.
- Dome Valve for Pneumatic Conveying: How It Works and Why It LastsHow a Dome Valve opens full bore, cuts through material and seals with an inflatable seal for pressure-tight isolation of abrasive ash, ores and powders.
- Ship/Barge Loading System for Fly Ash ExportHow jetty ship and barge loading systems export bulk fly ash: silo extraction, rotary feeder, screw conveyors, telescopic loader with dedusting, PLC control.
- 2-Stage Ash Handling System for Large Utility BoilersHow a two-stage fly ash system uses vacuum extraction from many ESP hoppers to a buffer hopper, then pressure conveying over a long distance to the main silo.
- Lean Slurry vs HCSD: Comparing Ash Disposal SystemsLean slurry (10-40% solids) vs high concentration slurry disposal (50-65% solids): water use, ash pond land, pumps, power, and when to retrofit to HCSD.
- Ash Handling System for an 800 MW Power Plant: Design, Capacity and Key ConsiderationsSizing ash handling for an 800 MW unit: ash mass balance from coal burn and ash content, the 80:20 fly to bottom ash split, redundancy, storage and disposal.
- The Future of Efficient Ash Disposal: How Pneumatic Ash Handling Systems Are Revolutionising IndustriesThe drawbacks of mechanical, wet slurry and truck ash disposal, and how enclosed dense phase pneumatic systems cut dust, water use and maintenance.
- Pneumatic vs Mechanical Ash Handling: Which System Is Right for Your Industry?Compares mechanical ash handling (belts, chains, screws, slurry) with dense and dilute phase pneumatic systems on cost, maintenance, dust and water use.
- A Step-by-Step Guide to Pneumatic Ash Handling Systems: Working, Benefits and ApplicationsStep-by-step guide to pneumatic ash handling: collecting ash, conveying it in dense or dilute phase, storing it in silos, and reusing it in cement and bricks.
- Revolutionising the Power Industry: A Deep Dive into Advancements in Ash Handling TechnologiesHow ash handling evolved from manual methods to dense phase pneumatic conveying, the benefits of modern systems, and the automation trends ahead.
- Ash Handling Technology: The Latest InnovationsWhy ash handling needs innovation, the three main technologies (pneumatic, mechanical, hybrid), and the efficiency, safety and environmental gains they bring.
- Ash Handling in the Power Industry: Challenges and SolutionsWhy ash handling is hard in coal power plants (volume, dust, abrasion, fire risk, cost) and the remedies: pneumatic conveying and dust suppression.
- Ash Handling System in a Thermal Power PlantTypes of ash in a thermal power plant (fly, bottom and bed ash, slurry), the risks they pose, and the dense phase, bottom ash and HCSD systems MBL supplies.
- Top 5 Uses of Fly Ash in Cement and Allied IndustriesFive uses of fly ash: lime-gypsum bricks to IS 16720:2018, partial cement replacement, roads and embankments, mine backfilling and wastewater coagulant.
- Handling Difficult Materials Through Pneumatic ConveyingHow pneumatic conveying moves bulk powders and granules: positive and negative pressure, dilute vs dense vs pulse dense phase, and how to select a system.
- What Are the Different Types of Ash Handling System?Hydraulic, pneumatic and mechanical ash handling explained, with fly ash, bottom ash and slurry disposal, and typical ash generation for a 2 x 500 MW plant.
- Utilisation of Fly Ash in IndiaWhy fly ash utilisation matters in India, with 600 million tonnes a year projected by 2030-31, and how it is used in cement, roads, embankments and bricks.
- Utilisation of Fly Ash in Cement and Allied IndustriesHow fly ash is used in brick making (India makes over 20 billion fly ash bricks a year), cement, roads, embankments, mine backfill and wastewater treatment.
- Potential Future Applications of Fly Ash ReuseEmerging fly ash reuse: cement replacement saving about a tonne of CO2 per tonne, low-cost building products, crop yields, metal extraction and beneficiation.
- Fly Ash Recovery and Disposal Trends Around the WorldHow the USA, China, Germany, the Netherlands and the UK regulate, store and reuse coal fly ash, from landfill standards to near-total reuse and zero landfill.
- Ash Handling Systems for Various Types of BoilersHow boiler type shapes the ash handling system: stoker-fired, AFBC, CFBC, pulverised fuel (about 80% fly ash) and waste heat recovery boilers compared.
Coal handling
- Coal Handling System for Power Plants: Macawber Beekay's EPC ExpertiseHow a power plant coal handling system works, from wagon tippler or track hopper unloading through crushing, stacking and reclaiming to bunker feeding.
- Coal Mill Rejects Handling System Using Dense Phase Pneumatic ConveyingHow dense phase pneumatic conveying moves pyrites, tramp metal and stones up to about 40 mm from coal mills to a rejects bunker in enclosed overhead pipes.
- What Equipment Is Used in a Coal Handling Plant?Main coal handling plant equipment: belt conveyors, crushers, vibrating screens, feeders, dust collectors, stackers, reclaimers and magnetic separators.
- Cost-Benefit Analysis of Upgrading to an Advanced Coal Handling PlantWeighs the cost of upgrading to an advanced, automated coal handling plant against gains in efficiency, emissions, safety and running cost, and judging ROI.
- What Is the Capacity of a Coal Handling Plant?What coal handling plant capacity means, the factors that affect it (coal type, size, moisture, conditions), design vs actual capacity, and how to raise it.
- Importance of a Coal Handling PlantThe parts of a coal handling plant (unloading, crushing, conveying, stacking, reclaiming) and why it matters for fire and dust safety, pollution and uptime.
- What Is a Coal Handling System?What a coal handling system is and its typical parts: crusher, storage yard, feeders, conveyor belts, ash handling and dust suppression, and why it matters.
- What Are the Types of Coal Handling System?An overview of coal handling system types, from manual and mechanical to hydraulic and pneumatic, plus the ash handling and dust suppression systems in a CHP.
Green coal and waste to energy
- How Waste Coal Is Powering Industries While Reducing Landfill WasteWhat waste coal (gob, culm, slurry, tailings) is, the hazards its piles cause, and how fluidised bed combustion turns it into fuel for power, cement, steel.
- Can Green Coal Replace Fossil Fuels? The Future of Alternative EnergyWeighs green coal as a fossil fuel alternative: lower emissions and use in existing plants against cost, scale and competition from solar, wind and hydrogen.
- From Waste to Fuel: The Science Behind Green Coal TechnologyExplains green coal (bio-coal): how waste is selected and torrefied into a coal-like fuel, its lower carbon footprint, its uses and the barriers to scale-up.
- How Green Coal Is Redefining Renewable Energy and Reducing Carbon EmissionsAn overview of green coal approaches (bio-coal, carbon capture, coal washing), their emission benefits, the industries adopting them and the challenges ahead.
- What Is the Composition of Coal Refuse?Coal refuse is mostly rock fragments (30-90%), mineral matter (5-40%) and organic matter (1-15%). Its risks, such as acid mine drainage, and its uses.
- Waste to Energy: A Sustainable Solution to India's Growing Waste ProblemHow waste to energy tackles India's 62 million tonnes of solid waste a year, the government support behind it, and Macawber Beekay's waste-to-coal plants.
- What Is Waste Coal Called?Waste coal, also called gob or culm, is low-quality coal left by mining. Its environmental hazards and uses in power, heating, soil amendment and reclamation.
- What Is the Composition of Coal Refuse?What coal refuse contains (sandstone, shale, clay, silt, coal dust, pyrite), the risks of refuse piles, and its uses in land reclamation and bricks.
- Uncovering the Mystery of Green Coal: What You Need to KnowWhat green coal is, how waste-to-coal plants make it from municipal solid waste via refuse-derived fuel and a reactor, how it differs from coal, and its uses.
- Waste to Energy: Turning Municipal Solid Waste into Green CoalHow waste-to-coal plants turn municipal solid waste into green coal pellets in a charcoal reactor at 200-300°C, and why fuel-burning industries should switch.
- Waste to Coal: Green Bio-CoalMacawber Beekay's green coal from municipal solid waste: up to 600 T/day, carbon neutral, about 2 kg CO2 saved per kg of fossil coal replaced, and lower ash.
Life at Macawber Beekay
- POSH (Prevention, Prohibition and Redressal) at MBPLHow Macawber Beekay applies the POSH Act, 2013: an Internal Complaints Committee, written guidelines that cover visitors and vendors, and awareness training.
- Long Service RecognitionMacawber Beekay honours employees with more than 25 years of service, recognised at company functions by Chairman and Managing Director Shri Ajay Kumar Gupta.
- Rewards and RecognitionHow Macawber Beekay recognises its people: long service awards at 25 years, retirement honours and National Safety Week rewards for health and safety at site.
- The Gift of Humanity: Blood DonationMacawber Beekay's HR department thanks Sr. Design Assistant Anil Kumar of the Design Mechanical department for volunteering to donate blood during Covid-19.