Dome Valve
A Dome Valve is a material inlet and isolation valve for pneumatic conveying: a dome swings clear of the flow path to open, then cuts through the material and seals pressure-tight with an inflatable seal to close.

Macawber Beekay's Dome Valve gives full-bore, unobstructed flow and long life with abrasive materials, and it is fitted at the inlet of the conveying vessels in our dense phase pneumatic conveying and ash handling systems.
The Dome Valve concept
Macawber Beekay's Dome Valve is simple in concept and revolutionary in performance. When open, it gives the material an unobstructed flow path, which prolongs its life and makes it reliable and low-maintenance. When closed, an inflatable pneumatic seal makes it airtight, giving a dust-free environment and saving energy. The dome cuts through a moving or static column of material to close properly, and a quarter turn moves it from closed to open.
These features make the Dome Valve more efficient, more reliable and longer lasting than butterfly, cone, plate or flap valves. Its ability to open and close with a tight pressure seal lets it work in harsh environments with abrasive materials. Bulk-head and in-line versions are available.
How the seal works
There is no seal contact while the dome is moving.
The seal is inflated only when the dome is closed.
Construction and manufacture
The dome is available in cast iron, alloy cast iron or stainless steel to suit the application. Dome Valves can be actuated by a pneumatic or hydraulic cylinder or by a vane actuator. They are manufactured on CNC machines at Macawber Beekay's manufacturing units, after stringent quality checks.
Core benefits
- Full-bore, unobstructed material flow.
- Simple, fully proven design.
- Cuts through a moving or static column of material.
- Wide range of valve sizes, from 50 mm to 500 mm.
- Pressure-tight seal when closed.
- Completely leak-proof, so no environmental pollution.
- Low maintenance.
- 10,000 derivatives in use worldwide.
- 1,000,000 cycles between major overhauls with most materials.
Materials handled
Ash, minerals, ores, sand, powders, granules, detergents, chemicals, and toxic, hazardous and cohesive materials. The valve is used in power generation, cement, iron, mineral, ferrous and non-ferrous, and chemical industries.
Operating environment
- Temperatures from -20 °C to +480 °C.
- Pressures up to 30 bar.
Where the Dome Valve is used
The Dome Valve is the ash intake valve below ESP and air pre-heater hoppers in our fly ash handling systems, the inlet valve of the Denseveyor in coal mill rejects handling, and part of our dense phase bulk material handling. Genuine Dome Valves and parts are available from our spare parts department.
Further reading
Last reviewed
Dome Valve
| Bore sizes | 50 mm to 500 mm |
|---|---|
| Temperature | -20 °C to +480 °C |
| Pressure | Up to 30 bar |
| Seal | Inflatable pneumatic seal, pressure-tight when closed |
| Dome material | Cast iron, alloy cast iron or stainless steel |
| Actuation | Pneumatic or hydraulic cylinder, or vane actuator |
| Configurations | Bulk-head or in-line |
| Service life | 1,000,000 cycles between major overhauls with most materials |
On site and in the works
How it works, stage by stage
Open
A quarter turn moves the dome clear of the flow path, leaving a full-bore, unobstructed passage for material.
Close
The dome swings back, cutting through the moving or static column of material, and seats against the valve body. The seal does not touch the dome while it moves.
Seal
With the dome closed, the seal inflates against it to form a pressure-tight, airtight closure, ready for the vessel to be pressurised.
Release
The seal deflates before the dome opens again, so an inflated seal is not dragged across the sealing surface.
Questions buyers ask
What is a Dome Valve?
A Dome Valve is a valve used at the inlet of pneumatic conveying vessels and hoppers. A dome rotates a quarter turn to open, giving full-bore unobstructed flow, and closes by cutting through the material column, after which an inflatable seal makes it pressure-tight. It is more reliable and longer lasting in harsh, abrasive service than butterfly, cone, plate or flap valves.
How does the Dome Valve seal?
The Dome Valve uses an inflatable pneumatic seal. The seal is inflated only when the dome is fully closed, and there is no seal contact while the dome is moving. This gives an airtight, pressure-tight closure, a dust-free environment and energy savings, while keeping seal wear low.
What materials can a Dome Valve handle?
Dome Valves handle ash, minerals, ores, sand, powders, granules, detergents, chemicals, and toxic, hazardous and cohesive materials. They are used in power generation, cement, iron, mineral, ferrous and non-ferrous, and chemical industries for bulk material handling. Its full-bore flow and inflatable seal suit abrasive materials in particular.
What sizes and conditions is the Dome Valve available for?
Dome Valves are available in bore sizes from 50 mm to 500 mm, for temperatures from -20 °C to +480 °C and pressures up to 30 bar. The dome can be cast iron, alloy cast iron or stainless steel, actuated by pneumatic or hydraulic cylinder or vane actuator, in bulk-head or in-line form.
Why does the Dome Valve last longer than other valves?
When open, the dome sits clear of the material flow, so there is less opportunity for abrasive particles to strike or rub against the sealing parts, and there is no seal contact while the dome moves. With most materials the valve runs 1,000,000 cycles between major overhauls.
Explore related systems.
Fly ash handlingFly ash handling systems that convey dry fly ash from ESP, APH and economiser hoppers to silos by dense phase pressure or vacuum conveying, with Dome Valves.
Bulk material handlingBulk material handling: dense phase pneumatic conveying of cement, raw meal, limestone, sand and dusts, plus mechanical fly ash systems for cement plants.
Coal mill rejectsPneumatic coal mill rejects handling: dense phase conveying of pyrites and rejects up to 40 mm from pulveriser mills to bunkers, one enclosed system per mill.
Spare partsGenuine OEM spare parts for Macawber Beekay ash and material handling systems, including Dome Valves, made on CNC and robotic machines and held in stock.
Talk to our engineers.
Planning a dome valve project, or upgrading one? Our engineering team in Noida is ready to help.