Dry bottom ash handling: DryAshTech
Dry bottom ash handling removes bottom ash from below a boiler furnace without using water to quench or convey it.

Macawber Beekay's DryAshTech is a dry ash conveyor that cools and conveys the combustion residues of fossil-fired power stations and waste incineration plants, eliminating the bottom ash cooling water system, effluent treatment and the ash pond while delivering usable dry bottom ash.
How DryAshTech works
DryAshTech is a dry ash conveyor installed below the boiler furnace. It cools and conveys bottom ash and other combustion residues without water, which meets demanding requirements for environmental protection and conservation of resources.
The conveyor runs on rolling friction: the belt moves over stationary supporting rollers, and the other working components are located away from the material being conveyed. This gives low wear and high reliability. The supporting rollers are lubricated for life and can be removed from outside the conveyor. Together with impact tables that absorb single weights of more than 5.0 t, they keep the plant running without trouble.
Benefits of dry bottom ash handling
- Fully enclosed system.
- No water for quenching hot bottom ash, so no bottom ash cooling water system and no effluent water treatment system.
- No ash pond needed for bottom ash, so no impact on ground water quality.
- Compliance with environmental protection regulations.
- Lower thermal energy losses and less unburned carbon, improving boiler efficiency.
- Low maintenance costs.
- Usable bottom ash quality.
- Dry ash that is easy to transport.
Key features
- Rolling friction for low wear and reliability above 99%.
- Significantly reduced operating cost and trouble-free operation.
- Conveying components protected from the conveyed material.
- High bending strength from profiled belt elements.
- 100% reversible.
- Robust, proven and highly wear-resistant components.
- Temperature resistant to over 1000 °C.
- Conveying width over 4,000 mm.
- Conveying capacity over 100 t/h.
- Stationary supporting rollers, lubricated for life and easily replaced from outside.
- Low sound emissions.
- Burst-proof double-stranded fork chain with "DOGAL Connect" connection.
- Each belt element connected to only one chain link, of 250 mm.
- Safe screw connection between chain and belt elements, with no high-wear connecting pins.
- Only one pivot point per belt element, with no gap, free play or wear between the chain links of one belt element.
- Fixed lateral guidance, so the belt cannot slip sideways.
Where DryAshTech fits
DryAshTech is an alternative to wet jet pump and semi-dry SSCC bottom ash systems for plants that want to eliminate water from bottom ash handling.
Further reading
Last reviewed
DryAshTech conveyor
| Handles | Bottom ash below the boiler furnace |
|---|---|
| Applications | Fossil-fired power stations; waste incineration plants |
| Water use | None (water-free operation) |
| Conveying capacity | Over 100 t/h |
| Temperature resistance | Over 1000 °C |
| Impact tables | Absorb single weights of more than 5.0 t |
| Reliability | Over 99% |
| Chain | Burst-proof double-stranded fork chain; one 250 mm link per belt element |
Talk to our engineers
Our team in Noida answers enquiries on dry ash tech.
Get in touch+91 120 450 7700On site and in the works
How it works, stage by stage
Receive ash below the furnace
Bottom ash falls from the boiler furnace onto the DryAshTech conveyor, a fully enclosed system with no water bath.
Cool and convey
Profiled belt elements, carried on stationary supporting rollers by a double-stranded fork chain, move the hot ash away while it cools. Impact tables absorb single weights of more than 5.0 t.
Discharge dry ash
The ash leaves the conveyor dry, as usable bottom ash that is easy to transport for further handling, storage or reuse.
Questions buyers ask
What is dry bottom ash handling?
Dry bottom ash handling removes and conveys bottom ash from below the boiler furnace without water as the quenching or conveying medium. Because no slurry is formed, the plant needs no bottom ash cooling water system, no effluent treatment for that water and no ash pond for the bottom ash stream.
What are the benefits of the DryAshTech conveyor?
DryAshTech is fully enclosed and water-free, so it eliminates the bottom ash cooling water and effluent treatment systems and the ash pond, with no impact on ground water quality. It reduces thermal energy losses and unburned carbon, improving boiler efficiency, has low maintenance costs, and produces usable bottom ash that is easy to transport.
How does DryAshTech keep wear low?
The conveyor runs on rolling friction over stationary supporting rollers that are lubricated for life and replaceable from outside. The conveying components sit protected from the ash, each belt element is screwed to a single chain link with no high-wear connecting pins, and fixed lateral guidance stops sideways slipping.
What loads and temperatures can DryAshTech take?
Impact tables combined with the supporting rollers can absorb single weights of more than 5.0 t, and the conveyor is temperature resistant to over 1000 °C. It runs on a burst-proof double-stranded fork chain.
Explore related systems.
Bottom ash handlingBottom ash handling systems for PF and CFBC boilers: jet pump, submerged scraper chain conveyor (SSCC), dry and dense phase systems by Macawber Beekay.
Fly ash handlingFly ash handling systems that convey dry fly ash from ESP, APH and economiser hoppers to silos by dense phase pressure or vacuum conveying, with Dome Valves.
Ash handlingAsh handling systems and plants for PF and CFBC boilers: fly ash, bottom ash, dry bottom ash and slurry disposal, designed and built by Macawber Beekay.
Spare partsGenuine OEM spare parts for Macawber Beekay ash and material handling systems, including Dome Valves, made on CNC and robotic machines and held in stock.
Talk to our engineers.
Planning a dry ash tech project, or upgrading one? Our engineering team in Noida is ready to help.